Login


Wolfe Publishing Group
    Menu

    21 Sharp in the Xpert

    New Winchester Cartridge, New Winchester Rifle

    Accuracy and velocity testing show Winchester’s Xpert rifle and 21 Sharp cartridge to be an excellent combination for hunting. The oversize scope was used only for evaluating the rifle/ammo combo.
    Accuracy and velocity testing show Winchester’s Xpert rifle and 21 Sharp cartridge to be an excellent combination for hunting. The oversize scope was used only for evaluating the rifle/ammo combo.

    Winchester introduced the Xpert rifle in 2023 and announced the 21 Sharp cartridge in late 2024, though neither the cartridge nor a so-chambered Xpert were available until 2025. We examined the 21 Sharp cartridge in depth in Rifle No. 344 (January-February 2026) and, without repeating the details here, concluded the cartridge can stand on its own merits without comparison to its parent cartridge, the 22 Long Rifle, and that it also won’t replace the vested and venerable 22 Long Rifle.

    Winchester chambers its Xpert rimfire rifle in 17 HMR, 17 WSM, 21 Sharp, 22 Long Rifle and 22 Magnum. Xperts and 21 Sharp ammunition have been a bit slow coming to market.
    Winchester chambers its Xpert rimfire rifle in 17 HMR, 17 WSM, 21 Sharp, 22 Long Rifle and 22 Magnum. Xperts and 21 Sharp ammunition have been a bit slow coming to market.
    The flush-mount, 10-round rotary magazine kicks out by pulling backward on the serrated red rails on the left and right sides, or via the red lever forward of the magazine well.
    The flush-mount, 10-round rotary magazine kicks out by pulling backward on the serrated red rails on the left and right sides, or via the red lever forward of the magazine well.

    That said, only one of Winchester’s four 21 Sharp loadings, the 25-grain Copper Matrix bullet load, was available until the end of 2025. Patience paid off in that the 34-grain Super X JHP load finally landed in my hands in February 2026, and I was able to include it at the last minute in this evaluation of Winchester’s Xpert rifle/21 Sharp cartridge combination. Winchester’s 21 Sharp 42-grain FMJ loads are on dealer shelves now, and the 37-grain Black Copper Plated load should be available as you are reading this.

    A major positive for the 21 Sharp is that

    The sights are plastic. The rear sight adjusts for windage and elevation by loosening its fastening screw, but it does not index.
    The sights are plastic. The rear sight adjusts for windage and elevation by loosening its fastening screw, but it does not index.
    Bolt handle roots universally serve as locking “lugs” on rimfire rifles, but the Xpert has a second locking lug to accommodate the higher pressure of the 17 WSM cartridge.
    Bolt handle roots universally serve as locking “lugs” on rimfire rifles, but the Xpert has a second locking lug to accommodate the higher pressure of the 17 WSM cartridge.
    bolt action rifles and ammo are quite affordable when you can find them, so there’s no major financial commitment to satisfying personal curiosity and being able to talk with friends about the new cartridge from a position of experience. I bought a Savage MK II FV SR new for $315 including sales tax, and a wooden-stocked Winchester Xpert for about $50 more. Winchester Xpert rifles wearing synthetic stocks are less expensive than the wood-stocked Xperts, and I’m sure I’ve seen an uglier synthetic stock than that on the Xpert, but I can’t remember where. I happily paid a bit more for wood and forthwith acknowledge it’s strictly an “eye of the beholder” thing. Thanks to accuracy enhancements applied at the factory, the Winchester Xpert shot with somewhat better precision than the synthetic-stocked Savage.

    Proving that guns don’t have to be ugly, the Xpert’s wood stock appears to be walnut with plenty enough figure for the money, lightly stained and wearing a satin oil finish. Winchester added borderless cut checkering after staining and finishing, giving the panels four at the pistol grip and six on the foreend a lighter hue that contrasts nicely with the warm finish. Inletting around the action and trigger guard/floorplate is quite good, with no large gaps or overly proud wood. The pistol grip feels exceptionally slim. Fit of plastic buttplate to stock is also quite good, and the factory-installed sling swivel studs.

    Winchester wisely elected to design the Xpert to accept ubiquitous Ruger 10/22-style magazines.
    Winchester wisely elected to design the Xpert to accept ubiquitous Ruger 10/22-style magazines.
    Separating the barreled action from the stock reveals two dollops of a black, softish plastic material where one would expect to bed the action for improved accuracy, at the action’s rear and under the barrel nut. The latter bedding, in fact, causes the barrel to free float for its entire length. A hole drilled into the stock just behind the barrel nut accepts a slot-head pin threaded into the underside of the receiver, which serves as enough recoil lug for the mild cartridge. 

    That barrel nut with ordinary wrench flats appears to serve the same function as the signature barrel nut on many Savage centerfire rifles, a quick and easy way to set cartridge headspace while attaching the barrel to the receiver. A barest suggestion of a dished-out recess offers the Xpert’s muzzle crown a modicum of protection. 

    Front and rear sights and sight bases appear to be plastic, each attached to the barrel via a single screw. The rear sight slides on an incline to adjust elevation and is also windage adjustable, both accomplished by loosening its mounting screw, but there are no indexing or index marks. With less than one inch of drop at the heel, the Xpert (with this wood stock, anyway) is really

    A slot-headed pin threaded into the receiver bottom mates to a hole in the stock to act as a recoil lug.
    A slot-headed pin threaded into the receiver bottom mates to a hole in the stock to act as a recoil lug.
    designed for scope shooting, and the factory sights can be easily removed or left installed as backup.

    With a few exceptions, in closing the action of any rimfire bolt action rifle, turning the bolt handle downward forces the root of the bolt handle to slide forward along an incline cut into the side of the receiver wall, providing a camming action to assist in overcoming resistance to fully closing the bolt. The bolt handle then slides down into a vertical recess cut in the receiver wall where the root of the bolt handle then serves as the bolt’s lone locking lug. This is perfectly adequate, given most rimfire cartridges’ comparatively low pressures. 

    Winchester’s Xpert, too, locks in this manner, but its bolt also has a locking lug just forward of the bolt handle, visible when the bolt handle is raised. This lug turns downward to lock into a cutout in the right receiver wall upon lowering the bolt handle. Winchester also chambers Xpert rifles in 17 WSM, which produces about 9,000 pounds per square inch (psi) more chamber pressure than the Xpert’s 17 HMR, 21 Sharp, 22 Long Rifle and 22 Magnum chamberings, explaining the presence of that

    A black, soft plastic material under the barrel nut and at the receiver rear is a bedding material to improve accuracy.
    A black, soft plastic material under the barrel nut and at the receiver rear is a bedding material to improve accuracy.
    second lug. The lug serves additional duty as a guide, riding in a slot cut in the receiver wall and preventing bolt wobble when pulling the bolt rearward. This gives the Xpert’s action a feeling of being both tight and slick, as on a fine centerfire bolt-action rifle.

    Trigger adjustment requires removing the trigger guard assembly. Adjusting the trigger to its  minimum caused the adjusting screw to protrude so far that it prevented reinstalling the trigger guard assembly.
    Trigger adjustment requires removing the trigger guard assembly. Adjusting the trigger to its minimum caused the adjusting screw to protrude so far that it prevented reinstalling the trigger guard assembly.
    Barrel, action and bolt handle are matte black, as is the plastic trigger guard/floorplate assembly. The action top is drilled and tapped 6-48 for scope mounting, but whether due to oversight or policy, the factory did not install plug screws on this rifle. Picatinny rails for the Xpert are available, but to my eye they are overly bulky, inappropriately “tactical,” and dominate the receiver lines of the petite rifle. Weaver’s more reserved No. 16 top mounts fit the rifle, and at less than $10 a pair, they cost a fraction of a Pic rail. 

    Though configured slightly differently, the Xpert’s rotary magazine is instantly recognizable as that of the Ruger 10/22, and the rifle does, indeed, accept the 10- and 15-round 10/22 magazines I checked for fit. Unlike Ruger’s magazine, Winchester’s isn’t made to easily disassemble for cleaning, and the feed lip assembly is made of a non-ferrous material, perhaps of a zinc alloy, rather than steel. The Xpert’s magazine features a knurled thumbwheel that relieves pressure from the follower spring and is intended to ease loading

    The 21 Sharp ammunition tested here is the 25-grain Copper Matrix (left) and the 34-grain JHP (right).
    The 21 Sharp ammunition tested here is the 25-grain Copper Matrix (left) and the 34-grain JHP (right).
    cartridges, but I found the thumbwheel too narrow and the magazine spring too strong for the thumbwheel to be of practical assistance.

    In addition to the Xpert’s magazine, the Ruger 10/22 magazines used here seated and ejected without complaint; ejection, in fact, was so energetic that all magazines jumped completely clear of the rifle. One can eject the magazine by pulling backward on the release in front of the magazine well, or by pulling rearward on the serrated red sliding releases on each side of the stock. These, I found, work well when wearing winter mittens. They also provide a visual indication that the magazine is fully seated: if the releases aren’t fully forward, the magazine is not properly seated.

    Called the “MOA Trigger” by Winchester, the trigger assembly features a three-lever design that Winchester boasts has no creep, take-up or overtravel, and with a crisp break - all of which I found to be true. As on a fine centerfire rifle, the trigger is placed well back, almost touching the back of the trigger guard, allowing ample room for a gloved finger.

    Trigger pull weighed in at 41⁄2 pounds out of the box and is adjustable from about 31⁄2 to six pounds. The trigger guard assembly must be removed to access the trigger pull adjustment screw, easily done by turning out the two 3mm hex head retaining screws that also serve to secure the barreled action to the stock. Turning the trigger adjustment screw outward with a 1.5mm wrench to reduce trigger pull to 33⁄4 pounds resulted in so much of the screw protruding that it blocked the trigger guard assembly from being reinstalled. Turning the trigger adjustment screw back in just far enough to allow reassembly brought trigger pull back up to four pounds.

    When adjusting trigger pull weight, be aware that Winchester cautions against dry firing the Xpert, as doing so may cause damage. For rimfire rifles, such damage consists of breaking the firing pin or peening the breech face such as to eventually cause cartridges to fail to chamber. For trigger adjusting, I chambered a fired cartridge case to take the repeated blows of the firing pin.

    Both loads shot minute-of-squirrel-head at 25 yards, and groups were only slightly larger at  50 yards.
    Both loads shot minute-of-squirrel-head at 25 yards, and groups were only slightly larger at 50 yards.
    When boresighting after mounting a scope, note that no one yet makes an optical boresighter spud to properly fit the 21 Sharp’s bore (.205 inch across the lands). A spud for a 204 Ruger (about .200 across the lands) might serve, though a bit loose, but I didn’t have one on hand to try. A 22 Long Rifle laser boresighter doesn’t work, either, as it can’t project a clean laser dot for sighting because it won’t fully enter the 21 Sharp chamber. However, a magnetic collimator-type boresighter, such as Leupold’s ScopeSmith, works fine.

    To mitigate shooter error as much as possible, for accuracy testing I mounted a high-magnification Osprey Global 6-24x50 scope; for ordinary use, of course, a compact rimfire scope is the way to go. Again, with less than an inch of drop at the heel, using the open sights requires shouldering the buttstock so high that only the toe is shouldered and the comb is well up on the shooter’s cheekbone. Mounting a scope brings the comb and butt stock down to a comfortable level.

    Admittedly subjective, I did, however, note that the Xpert’s barrel warmed considerably during testing, more so than does a similar rifle chambered in 22 Long Rifle (but nowhere near as much as a centerfire rifle barrel). I attribute this to the jacketed and solid copper bullets creating more friction within the bore than do lead 22 Long Rifle bullets. Barrel heating certainly opened up groups a bit. I had a nice 25-yard, one-hole group going with the 34-grain JHPs when the fifth shot landed a half-inch away. Still, once I had my zero, the first shot from a cold bore, as in a hunting situation, landed dead center every time.

    The 21 Sharp cartridge is still very new, and both cartridges and rifles have been slow getting to market. It took a considerable internet search to find 21 Sharp rifles in stock last year, and at several larger sportsmen’s retail stores throughout 2025, my query “Have you got any Twenty One Sharp ammo?” earned me a quizzical look and a “Twenty what?” from the clerks. 

    Pushing into 22 Magnum velocity territory at close to 1,900 feet per second (fps), the 25-grain Copper Matrix load shoots flatter than virtually any 22 Long Rifle load, and hunters and plinkers can utilize it where lead bullets are prohibited. The 34-grain JHP load matches the highest velocity found among 22 Long Rifle loads, and 21 Sharp ammunition overall is about half the price of 22 Magnum. Winchester’s Xpert is an excellent choice for introducing oneself to the 21 Sharp – it is inexpensive, features accuracy enhancements (bedding, recoil lug, adjustable trigger), makes an easy field carry and in its wooden stock configuration is a good looker. 

    Combined, these are all reason (or excuse) enough for any rifleman to try out this new rifle and new cartridge.


    Wolfe Publishing Group